This is a simple and easy use RFID Car Alarm with Finger Engine Start Push Button Start Stop and Transponder Immobilizer.
RFID Car Engine Push Starter is easy to install and use, can start or stop your car much easier and keep your car safe at the same time. This item is only work with DC12V cars at the moment.
Features:
Push button engine start.
Telecontrol starting function
Automatically lock the host after stalling 35 seconds.
10 minutes timing flame out function after telecontrol starting.
Telecontrol starting safe handbrake detection function.
Automatic locking the door function after telecontrol starting.
Open acoustics and dashboard function.
RFID engine lock.
Immobilizer, with warded lock card anti-theft function, the system will enter arming mode after 15 seconds automatically when car is stopped.
In arming mode, when the responder gets close to (about 2 – 5cm) the wire circle, the system will sound Bi Bi, which indicates the system is disarm.
Can be matched your car alarm system or keyless entry system.
Can be used in all kind of cars.
Easy to install and to detach.
Durable,Portable
Functions: Improve driving safety
Material: ABS,Electronic Components,Metal
Color: Black
Q & A :
1.How to find the ACC wire?
Please rearrange the 6P cable, after you twist the key to the first gear position (you can listen to music at this time), measure the line that has electricity on your original car is the ACC line.
2. For your 6p cable, but my original car is only 5p. what can i do ?
If your original car is a 5P line, the right connection is normally 1 power line, 1 ACC line, 2 ON lines, and 1 start line. If you didn’t follow this step, it means you got wrong installation. pls recheck it again. and pls remember 2 ON lines need to distinguish which is ON1 line and which is ON2 line. If the two ON lines are always charged at the time of startup, you need to connect the two ON lines in parallel.
3. How to tell the wire ON1 and ON2?
If you test these two ON lines at startup, one of the two that always has power is the ON1 line. And If the other one has instant power is the ON2 wire.
Package Contents:
1 x Car Engine Push Starter Host,
1 x Push Start Stop Button (1m Cable Length),
1 x RFID Sensor Ring (1.2m Cable Length),
2 x RFID Key,
2 x Wire (0.6m / 1m),
1 x English User Manual
Today I installed it on UAZ, everything works like a clock. I really liked it. It is possible to write up to 4 keys. There is a function of emergency start DVS.
It came very quickly, put without problems gas-3110, one click turn on the ignition, the second click of the power devices, when the brake pedal is pressed and the second press is triggered by a starter, the motor is muffled when the pedal is pressed and the button is pressed. The ibolizer works both tablets, lift two peaks and the system is ready to start. Turns off in a minute of inaction or also from the tablet.
The goods came quickly. The box is broken, but it's like everything. In the work has not yet checked.
The order came relatively quickly-within 2- 3 weeks The Russian Post Distinguished once again-the box as from the "one" place .. All burned But the contents themselves are whole In work did not check
It came quickly. All as in the description
Delivery is fast, everything works well